Cerca

• Fabricante:
  American Augers
• Modelo:
  24/30-150

DIMENSIONS
Length: 11'4" (3.43 m)
Width: 3' (0.91 m)
Height: 4'7" (1.40 m)
Master Track Length: 11' (3.4 m) with 1" (25 mm) back plate
Master Track Width: 4'6" (1.37 m)
Centerline: 18.12" (460 mm)
Extension Track Length: 10' (3 m)
Extension Track Width: 4'6" (1.37 m)

WEIGHT
Base Unit/Powerpack: 4,300 lbs (1,950 kg)
Master Pusher: 425 lbs (193 kg)
Master Track: 1,000 lbs (454 kg)
Lifting Sling: 75 lbs (34 kg)
Total Weight 5,800 lbs (2,631 kg)
Extension Track: 950 lbs (430 kg) each
Master Saddle: 90 lbs (41 kg)

POWER TRAIN
Engine: Deutz D2011LOI Interim Tier IV Diesel
Rating: 46 HP (34.3 kW)
Maximum Engine Speed: 2,800 RPM
Engine Torque -
89 ft-lbs (120.7 Nm) @ 2,800 RPM
101 ft-lbs (136.9 Nm) @ 1,700 RPM
Maximum Noise Rating: 100.5 dB(A)
Fuel Capacity: 10 U.S. Gallons (38 L)
Hydraulic Capacity: 14.5 U.S. Gallons (55 L)
Battery: (1) Deka 634MF 12 V, 690 CCA

TRANSMISSION
Type: T-18, 4-Speed, Constant Mesh
Transmission Ratios -
1st Gear - 6.32:1
2nd Gear - 3.09:1
3rd Gear - 1.69:1
4th Gear - 1.00:1
Reverse - 7.44:1
Clutch: Spring Applied with 10" (254 mm) Diameter Single Disk/Hydraulically Assisted Clutch Actuator

GEARBOX
Ratio 47.6.1

TORQUE AND SPEED

Torque Requirements (2800 RPM)
1st 26,268 ft-lbs. (35,608 Nm) 9 RPM
2nd 12,843 ft-lbs.(17,406 Nm) 19 RPM
3rd 7,024 ft-lbs. (9,523 Nm) 35 RPM
4th 4,156 ft-lbs. (5,635 Nm) 60 RPM
Reverse 30,923 ft-lbs. (41,933 Nm) 6 RPM

Torque Requirements (1700 RPM)
1st 29,810 ft-lbs. (40,420 Nm) 6 RPM
2nd 14,575 ft-lbs.(19,756 Nm) 12 RPM
3rd 7,971 ft-lbs. (10,810 Nm) 22 RPM
4th 4,717 ft-lbs. (6,395 Nm) 36 RPM
Reverse 35,092 ft-lbs. (47,852 Nm) 5 RPM

HYDRAULIC SYSTEM
Maximum Thrust: 150,000 lbs. (68 Tonnes)
Hydraulic Pump: Tandem Gear
Maximum Pump Pressure: 4,000 psi (276 bar)
Maximum Pump Output: 23 U.S. Gallons (87 L)/minute
Hydraulic Thrust Cylinder: (3) 4" Bore x 36" Stroke (102 mm x 914 mm)
Hydraulic Suction Strainer Filter: Suction Strainer with 100 Mesh Screen
Hydraulic Return Filter: High Pressure Return Filter to 14 Micron ABS with Replaceable Element

MASTER PUSHER
Diameter: 24" (610 mm)
Working Range: 4 – 30" (102 – 762 mm) Casing Diameter
Hex Drive: 3" (76.2 mm)

SPOIL DOOR
With a Safety-First commitment all American Augers horizontal earth boring machines are equipped with a gravity activated spoil door, which deflects thrown debris from the spoil chamber.