Cerca

• Fabricante:
  Vermeer
• Modelo:
  D7x11A QS
• Tamaño de la plataforma:
  0 - 10,000 lbs Pullback

-*2015 NOVEMBER*-

GENERAL DIMENSIONS AND WEIGHTS
Weight: 4190 lbs (1900.6 kg)

ENGINE
Make and Model: Kubota- D-1505
Fuel Type: Diesel
Maximum Engine RPM: 3000 rpm
Gross Horsepower: 37.5 hp (28 kw)
Net Horsepower: 33.5 hp (25 kw)

OPERATIONAL
Pullback: 7800 lbs (3538 kg)
Maximum Carriage Speed at Maximum Engine RPM: 131 ft/min (39.9 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 1100 ft-lb (1491.4 Nm)
Maximum Spindle Speed at Max Engine RPM: 154 rpm
Minimum Bore Diameter: 2" (5.1 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1.5 mph (2.4 km/h)
Drill Rack Angle: 32 deg

FLUID CAPACITIES
Fuel Tank: 8 gal (30.3 L)
Engine Crankcase with Filter: 6 qt (5.7 L)
Hydraulic Tank: 13 gal (49.2 L)

DRILLING FLUID SYSTEM OPTION ONE
Maximum Flow: 9.5 gpm (36 L/min)
Maximum Pressure: 550 psi (37.9 bar)

FEATURES
Breakout System: Hydraulic open-top
Stakedown System: Stationary; dual stakes

-*2004*-

DRILL UNIT
Length: 137" (348 cm)
Width: 35.5" (90 cm)
Height: 66" (188 cm)
Weight: 4190 lbs (1901 kg) with 150' (46 m) stem
Open Top Vise: Yes
Transport Speed: 1.7 mph (2.7 kmh)
Stakedown System: Yes
Drilling Lights: Yes

OPERATIONAL
Max Spindle Torque: 1100 ft-lbs (1489 Nm)
Actual Pullback: 7800 lbs (3538 kg)
Actual Thrust: 7800 lbs (3538 kg)
Maximum Spindle Speed: 154 RPM
Electrical System: 12-volt

POWER SOURCE
Make and Model: Kubota- D-1505
Manufacturer's Gross HP Rating: 37.5 HP (28 kw)
Maximum Governed Speed: 3200 RPM

DRILL STEM
One-piece forged design: Yes
Length: 6' (1.8 m)
Pipe Diameter:
-1.66" (4.2 cm) standard
-1.32" (3.3 cm) optional
Minimum bend radius:
-95.5' (29.1 m) with 1.66" (4.2 cm) stem
-57.3' (17.5 m) with 1.32" (3.3 cm) stem
Weight:
-23 lbs (10 kg) 1.66" (4.2 cm) stem
-17 lbs (8 kg) 1.32" (3.3 cm)
Firestick stem capacity:
-198' (60.4 m) of 1.66" (4.2 cm) stem
-150' (45.7 m) of 1.32" (3.3 cm) stem

BORE
Maximum Bore Diameter: 2" (5 cm)

FLUID CAPACITIES
Hydraulic Reservoir: 13 gal (49 L)
Engine oil, including filter: 6 qt (6 L)
Fuel Tank: 8 gal (30 L)

FEATURES AND BENEFITS
Feature: Compact Size
Benefit: No other directional drill offers this much power in such a small package, allowing the operator to use it in congested areas where other machines cannot fit.

Feature: Torque
Benefit: Features 1100-ft-lbs. (1489 Nm) of torque to complete bores in tough conditions. The D7x11A QS delivers the power to turn cutting tools in demanding soil conditions and to accommodate larger backreamers than other machines in this class.

Feature: Dual Thrust/Rotation Controls
Benefit: The operator has complete and precise control over each function.

A choice specifically for last-mile installations. The D7x11A QS option is designed specifically for contractors that are looking for excellent capabilities in the smallest unit available. A variation of the D7x11A, the D7x11A QS is efficient, self-contained and powerful - all in a small footprint. It is shorter than the D7x11A and eliminates the onboard pump to increase rotational, pullback and tracking speed by up to 20 percent.